What should be paid attention to in the inspection and acceptance of logistics storage shelves

After the storage shelf is installed, the storage shelf manufacturer will carry out the final process, that is, acceptance. Many customers don’t know what details need to be paid attention to. If they don’t pay attention to the acceptance, it may affect the later use. Next, let’s talk about the details that need to be paid attention to in logistics warehousing shelf acceptance.

First of all, it is necessary to check against the layout plan designed by the storage shelf manufacturer. There is no special situation. Generally, the installation and debugging are carried out according to the layout plan, and the inspection is qualified. If it needs to be changed during the installation process, it can only be changed after the professional engineer makes an evaluation, and these changes shall be remembered during the acceptance.

Next is the details. For example, the height deviation of the same layer of storage rack is generally less than 10 mm, and the interference degree after full load is generally less than 1 / 200 mm, etc. If the deviation is too large, it will also affect the later storage.

It’s also important to know how tight the bolts and other fasteners are. If the bolt is not tightened, the safety will be affected. In the later use process, the bolt may be loose, and the safety cannot be guaranteed. This is also of special attention.

Surface spraying is also a point of inspection. A little damage is a normal phenomenon. If there is a large area of damage, it is a problem. If the surface is not treated properly, it will affect the service life of storage shelves, so this is also to be noted.

In addition, we need to pay attention to the supporting storage equipment, such as forklift, etc., and try to operate it to see how it works, whether it is suitable for the use of these storage shelves, as well as the problems needing attention in use.

There are also details such as the cleaning of the installation site. All in all, the first purpose of warehouse shelf acceptance is to make the later users operate smoothly, and to comply with the safety regulations to avoid potential safety hazards in use.