Gravity rack is a kind of rack which is used less in the warehouse. Because of its high precision, the cost is relatively high. In particular, the installation of this piece is more complex and more accurate than the ordinary warehouse racks. After some customers customize the gravity rack, they install the rack by themselves and invite others to install it. Here are some precautions for the installation of the gravity rack.
The gravity rack is composed of a column piece, crossbeam, roller system, and separation system. To achieve the first in, first out effect, the roller installation accuracy must be very high, so that the goods will not deviate from the track when the roller sliding.
Therefore, before installation, we should make overall installation planning, and make accurate planning for each step. If the installation is wrong, it will be more troublesome to dismantle and reassemble.
The bolts and other fasteners of the gravity rack shall be tightened, and the flexible bolts will also affect the deviation of the goods from the track when they slide on the roller in the later use process.
The storage density of the gravity rack is very high, which reduces the number of channels in the warehouse. High density also means high accuracy, otherwise, it will be stuck in the middle, and then debugging will be more troublesome.
The installation of a gravity rack is the same as that of radio shuttle rack and automatic warehouse, which requires higher accuracy and higher installation level. Before installation, it is better to find a professional gravity rack installation guide, so that the possibility of successful completion is higher.
Post time: Feb-03-2020